Audi 16352 – ATE MK61 ABS Unit Fault

Does your 2006-2015 Audi have an ABS light on and a 16352 code stored? This sounds like you’ve experienced a MK61 ABS unit fault. Don’t worry, we’re the experts at resolving this.

Shop Now - Audi 16352 Solution

Introduced in 2004 as the successor to the widely-used MK60, the ATE MK61 is fitted to popular Audi models such as the A3 (2005-2012), TT (2006-2014), Q7 (2005-2015) and S3 (2008-2013). 

Unfortunately each of these models are vulnerable to the aforementioned symptoms due to a fault-inducing manufacturing defect within their MK61 ABS unit. This defect causes typical ABS-related symptoms like an illuminated ABS or ESP warning light. However, one fault code in particular is the hallmark of an Audi MK61 malfunction:

16352 – Control Module Fault

Audi 16352 fault explained
As you’ll be aware, the ABS unit sends and receives signals that support various safety-critical vehicle functions. Therefore, it’s essential not only that the unit functions correctly, but that it can determine whether it is fully-functional or not. To determine this, the MK61’s control module performs a series of internal verification tests upon each start-up cycle.

When one of these ‘self-checks’ fails, it indicates an area of the MK61’s control module is defective, or at the very least, isn’t functioning as it should be. Inevitably, this causes your Audi’s MK61 to store a 16352 code for ‘control module faulty’.

When 16352 is stored, the MK61 module knows it’s defective and disables ABS, ESP and traction control functionality in your Audi as a safety precaution. This is of course communicated over the CAN bus and inevitably leads to the illumination of the relevant warning lights (ABS, ESP and traction control).

In some cases, a defective MK61 will also store codes like 01130 (ABS Operation Implausible Signal) and 01276 (ABS Hydraulic Pump Fault), but don’t worry, we can resolve these too – just fill out our test form and include the specific fault code you’re encountering.

How to resolve the Audi 16352 fault
If you’ve been recommended to completely replace your Audi’s ABS unit in an attempt to resolve 16352, you should consider an alternative solution.

This is because brand-new MK61 units are likely to share the very same design weaknesses that caused your original issue, leaving you vulnerable to repeat malfunction. As well as this, replacements are very expensive and you’ll need to have them coded to your vehicle at additional time and expense. 

Instead, we propose sending your ABS unit off for professional testing and having it remanufactured if defective. This is the very service we provide, and our team of technicians use state-of-the-art testing rigs to pinpoint the root cause of your Audi’s 16352 fault. 

Once the root cause of failure has been identified, we’ll remanufacture your control module with higher-than-OEM-standard components. This way, functionality is not only restored for today, it’s restored for the long-term future. We’ll even cover you with an unlimited-mileage lifetime warranty and you won’t need to recode the ABS unit back to your Audi.

Resolve your Audi’s 16352 code the right way, have your ABS unit remanufactured by the experts in just 2-3 working days. Fill out our short test form to begin.

Common Failure Symptoms:

• ABS light illuminated
• Traction control (ESP/ESC) light on
• Loss of ABS/ESC function 

Common Fault Codes: 

• 16352 - Control Module Fault
• 01130 - ABS Operation Implausible Signal
• 01276 - ABS Hydraulic Pump

Test and rebuild:
We use state-of-the-art testing rigs in order to pinpoint failure modes under realistic driving conditions. We even rebuild these ABS modules using components that exceed manufacturer standards.

Programming:
You won’t need to reprogram your MK61 ABS unit once it has undergone our test and rebuild process, just refit and bleed the system as standard.

Quality:
We pride ourselves on providing the highest quality possible. Our 0.49% defect rate shows why we are the number one automotive remanufacturing choice for thousands of garages worldwide.

Warranty:

Lifetime unlimited mileage*

How do I get my unit rebuilt?

To pay for the rebuild click the Shop Now link above, select your part number and click: Get yours rebuilt.

Print the payment/booking confirmation email.

Package the Audi’s ABS unit inside a sturdy box with plenty of packaging material and make sure you include your confirmation email in the box.

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received we will test, rebuild and return your control module with an unlimited mileage lifetime warranty. If your unit turns out not to be faulty then we will refund your payment less a small testing fee and return shipping.

What if I don’t want to pay up front?

This is not a problem, if you prefer this option then follow these steps:

Fill in and submit this test form.

Print the booking confirmation email.

Package the ABS unit inside a sturdy box with plenty of packaging material and make sure you include your confirmation email in the box.

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received, we will test your unit and call to inform you of the outcome of testing. If your unit is faulty and you choose to go ahead with the rebuild, then we will take payment over the phone using a debit/credit card.

We will then rebuild your module and return it to you with an unlimited mileage warranty.

If you require further information regarding this Audi 16352 fault then please contact us.