Volvo ABS pump/Module failure

Volvo ABS pump module fault

This is a very common failure on all Volvo ABS pumps built after 1995, causing the ABS light to come on along with the TRACS light if fitted. When fault codes are read there will usually be a code blaming the high pressure pump and/or a fault code blaming one or more wheel speed sensors.

The fault is normally always internal breakdown of the ABS module when these faults occur.

We can rebuild your own ABS pump/module, or we can supply replacement units from stock when available.

It is worth noting that the ABS module can be removed and the pump left in place thus allowing the vehicle to be driven with normal braking (no ABS). The Volvo ATE Teves ABS module is located underneath the main ABS pump and can be removed from it with a 4mm socket. The module can be rebuilt and sent back normally within 2-3 working days and comes with a Lifetime unlimited mileage warranty*.

 

Common Failure symptoms:

  • ABS warning light
  • TRACS warning light

 

Common fault codes:

  • BCM-0070 – Pump motor supply voltage, faulty signal
  • ABS-0050 – Control module, faulty signal
  • Wheel speed sensor codes

 

Affected Vehicles:

 

Common failing part numbers:

 

Test and rebuild:

Our purpose-built test rings allows us to test these ABS units under real-world load and once all faults have been identified we will rebuild using the highest grade components. Post rebuild testing will ensure that the rebuilt ABS will outlast the vehicle it is fitted back onto.

 

Programming:

There will be no need for programming once you receive the ABS module back from rebuild, simply plug and play.

 

Quality:

We have been rebuilding these modules for Volvo main dealers and specialists for many years now so you can be assured of our very high standard of work. We always replace components with higher than standard spec to ensure a rebuilt unit will never fail again.

 

Warranty:

Lifetime unlimited mileage*

 

How do I get my unit rebuilt?

To pay for the rebuild select your vehicle or part number and then click: Get yours rebuilt

Print the payment/booking confirmation email.

Package the Volvo ABS module/pump inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received we will test, rebuild and return your ABS with an unlimited mileage lifetime warranty. (if your unit turns out not to be faulty then we will refund your payment less a small testing fee and return shipping)

 

What if I don’t want to pay up front?

This is not a problem, if you prefer this option then follow the following steps:

Fill in and submit this test form.

Print the booking confirmation email.

Package the Volvo ABS module/pump inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received, we will test your ABS and call you to advise on the outcome of testing, if your unit is faulty and you choose to go ahead with the rebuild then we will take payment over the phone using a debit/credit card.

We will then rebuild your unit and return it to you with an unlimited mileage warranty.

If you require further information regarding this Volvo ABS module/pump, then please contact us.

Volvo Products/Services

Comments on "Volvo ABS pump/Module failure"
Jonathan Cummings says: 18/9/2019 9:53:10 AM
I have hand brake warning and traction control services required on the dash. Fault code if for pressure sensor A
ECU Admin says: 18/9/2019 9:58:08 AM
Hi Jonathan, looks like you may have a fault with one of the later ABS pump and modules. Please see the following page for more information: https://www.ecutesting.com/common-faults/volvo/c30c70s40v50-abs-pump-module-fault/
Leave a Comment All fields are required*