Peugeot 308, 3008 and Expert will not start due to engine ECU problems

Peugeot Expert, 308, 3008 engine ECU fault

This commonly failing engine ECU fitted to Peugeot 308, 3008 and Expert vehicles will cause intermittent to permanent running symptoms including the constant illumination of the engine management light, cutting out and complete failure to start.

 

Engine ECU problems will cause fault codes to be stored for untimely de-energisation of the power relay, sensor voltage supply and those for internal ECU/processor faults which often will not clear. As internal defects deteriorate the engine ECU may fail to establish communications completely.

 

When presented with these symptoms franchise main dealerships will seek to resolve the problem by way of an expensive new replacement ECU from manufacturer. However, this will also require coding at an extra expense and is susceptible to fail in the exact same way.

 

We offer a more cost-effective solution: test and rebuild of your original engine ECU with an unlimited mile Lifetime Warranty.

Our in-house R&D team have developed a rebuild solution for these common faults, using higher rated components than manufacturer standard we can rebuild your engine ECU within 0.49% for a fraction of the cost of buying new. All coding is retained meaning you can simply plug in the ECU when received back and be on the road again.

 

Common Failure symptoms:

  • Cutting out
  • Non-start / No crank
  • Engine management light on
  • No communications to the engine ECU

 

Common fault codes:

  • P068A – PCM Power Relay De-Energised Too Early
  • P0606 – PCM Processor Fault
  • P060C – Internal Control Module Main Processor Performance
  • P0659 – Supply of Sensors 5V No 1
  • P2671 – Supply of Sensors 5V No 2
  • P2686 – Supply of Sensors 5V No 3

 

Affected Vehicles:

  • Peugeot 308 (first and second generation T7 and T9) 2009 – 2015
  • Peugeot 3008 (first generation) 2009 – 2015
  • Peugeot Expert (second generation) 2010 – 2015
  • Peugeot 407 2009 – 2011
  • Peugeot 508 (first generation) 2011 – 2016
  • Peugeot 5008 (first generation) 2009 – 2015
  • Peugeot E7 (Hackney Cab) 2011 – 2015
  • Peugeot RCZ 2010 – 2015

 

Common failing part numbers:

Peugeot 308

Peugeot 3008

Peugeot Expert

Peugeot 407

Peugeot 508

Peugeot 5008

Peugeot E7

Peugeot RCZ

(Can’t find your part number? Check our full engine ECU catalogue for Peugeot 308, 3008, Expert, 407, 508, 5008, E7 or RCZ)

 

Test and rebuild:

Each ECU is rigorously tested using our bespoke testing rigs and visually inspected by our skilled technicians. Once all the faults have been identified we then move onto the rebuild stage, replacing defective components with those of a higher grade to OEM standard.

 

Programming:

During testing and rebuild of the ECU all original programming is retained, no need for expensive recoding when you receive it back.

 

Quality:

Due to our strict quality control on all aspects including testing, workmanship, components and ESD safety you can trust in our very high standard of work. In fact our work defect rate is lower than 0.49% across all of our rebuilds, and because of these measures we can confidently and proudly provide a full Lifetime Warranty on all of our work.

 

Warranty:

Lifetime unlimited mileage*

 

How do I get my unit rebuilt?

Pay for the rebuild here: Get yours rebuilt

Print the payment/booking confirmation email.

Package the engine ECU inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received we will test, rebuild and return your ECU with an unlimited mileage lifetime warranty. (if your unit turns out not to be faulty then we will refund your payment less a small testing fee and return shipping)

 

What if I don’t want to pay up front?

This is not a problem, if you prefer this option then follow the following steps:

Fill in and submit this test form.

Print the booking confirmation email.

Package the engine ECU inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received, we will test your ECU and call you to advise on the outcome of testing, if your unit is faulty and you choose to go ahead with the rebuild then we will take payment over the phone using a debit/credit card.

We will then rebuild your engine ECU and return it to you with an unlimited mileage warranty.

If you require further information regarding this Peugeot 308, 3008 and Expert engine ECU then please contact us.

Peugeot Products/Services

1007

106

107

2008

206

207

207 CC

208

3008

306

307

308

4007

406

407

5008

508

607

806

807

BIPPER

BOXER

E7

EXPERT

PARTNER

PARTNER COMBI

PARTNER HORIZON

PARTNER TEPEE

RCZ

Comments on "Peugeot 308, 3008 and Expert will not start due to engine ECU problems"
Leave a Comment All fields are required*