Mazda 3 ABS Pump Fault

Mazda 3 brake pressure sensor fault

Mazda 3 ABS Pump Module fault

 

Fault code: “C1288 Pressure transducer main/primary circuit failure”

 

This ABS Pump Module is a very common failure for the Mazda 3 built between 2004 - 2009. The fault causes the ESP light to illuminate permanently on the instrument cluster.

 

If you have been for a diagnostic check on your Mazda 3 then your mechanic will probably have told you that your have a fault with your “Brake Pressure sensor” or given you the full fault code of: “C1288 Pressure transducer main/primary circuit failure” and will probably have told you that you must replace your ABS Pump Module for a small fortune

 

We can rebuild your own ABS pump module to a new specification, at a fraction of the cost of replacement and provide an unlimited mileage Lifetime warranty*.

When we rebuild your ABS pump, we not only correct the problem but the materials and processes we use will reinforce your ABS pump module to prevent the fault from ever reoccurring.

 

Common Failure symptoms:

  • ESP light illuminated

 

Common fault codes:

  • C1288 – pressure transducer main/primary circuit failure

 

Affected Vehicles:

  • Mazda 3 2004-2009

 

(This is just a small list of common part numbers, please see our full Mazda 3 ABS list)

 

Test and rebuild:

Using our bespoke Hardware In-the-Loop testing stations we test these Mazda 3 ABS pump and modules under accurate load and driving conditions both before and after rebuild. Using only the highest rated components our technicians will ensure that all of our rebuilt units meet and exceed original manufacturers operating parameters.

 

Programming:

All coding information is kept original during testing and rebuild, meaning that there is no need for coding once you get it back

 

Quality:

Due to our strict quality control on all aspects including testing, workmanship, components and ESD safety you can trust in our very high standard of work. In fact our work defect rate is lower than 0.6% across all of our rebuilds, and because of these measures we can confidently and proudly provide a full Lifetime Warranty on all of our work.

 

Warranty:

Lifetime unlimited mileage*

 

How do I get my unit rebuilt?

To pay for the rebuild select your part number above and click: Get yours rebuilt

Print the payment/booking confirmation email.

Package the Mazda 3 ABS pump and module inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received we will test, rebuild and return your ABS pump with an unlimited mileage lifetime warranty. (if your unit turns out not to be faulty then we will refund your payment less a small testing fee and return shipping)

 

What if I don’t want to pay up front?

This is not a problem, if you prefer this option then follow the following steps:

Fill in and submit this test form.

Print the booking confirmation email.

Package the Mazda 3 ABS pump and module inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received, we will test your Mazda ABS pump and call you to advise on the outcome of testing, if your unit is faulty and you choose to go ahead with the rebuild then we will take payment over the phone using a debit/credit card.

We will then rebuild your ABS pump and return it to you with an unlimited mileage warranty.

If you require further information regarding this Mazda 3 ABS pump and module, then please contact us.

Mazda Products/Services

Comments on "Mazda 3 ABS Pump Fault"
Leave a Comment All fields are required*