Ford Focus & Ranger BCM Repair

If you’ve lost a host of electronic features in a Ford Ranger or Focus, your BCM (Body Control Module) might carry a known fault and be in need of repair. This is a frequent issue, commonly resulting in you being unable to start your Ford Focus or Ranger until the BCM is repaired. Don’t worry though, you’re in the right place and we can help.

Shop Now – Ford BCM Module Repair

The third-generation Ford Focus and facelifted first-gen Ranger are known to carry defective BCMs. Unless repaired, these faulty modules will cause a variety of irritating issues, from a loss of lighting to central locking issues. Most commonly, owners are left without low-beam headlights when failure strikes - which might explain why you’ve been unable to isolate a defective bulb or wiring fault. 

Due to the breakdown of your Ford BCM’s internal components, it’s common for diagnostic communication to be lost. In this situation, you’ll likely find communication-related fault codes stored in other modules, like U1000. In extreme cases, the faulty BCM even prevents the vehicle from starting by disrupting the immobiliser system’s usual start-up process.

As these issues stem from an internal failure within your Ford Focus or Ranger’s BCM, you’ll be unable to remedy them by simply charging or replacing the battery, you’ll need to have the body control module repaired or remanufactured.

Our Ford Focus & Ranger BCM Solution
When owners have traced their issues back to a defective body control module, they’ll commonly look to replace it. However, this isn’t the most effective option. 

Replacement modules consist of the very same components as the Ford BCM you’ve just experienced issues with. This means you’ll be susceptible to repeat failure later down the line. Thankfully, we’ve developed a full remanufacturing solution for Ford Ranger and Focus BCMs to finally provide owners with a long-lasting and reliable repair option. 

Now, it’s important to understand that our module rebuilds go a step further than regular Ford BCM repairs. To keep your Focus or Ranger out on the road for longer, we use higher-than-OEM-standard components and advanced remanufacturing techniques to rebuild your unit. This way, your control module is not only restored to full functionality, but its long-term durability is significantly enhanced too.

Better still, a Ford Focus/Ranger BCM rebuild is cheaper than replacing the module with new, and we’ll cover you with lifetime warranty – unlike most repair services. Our entire process takes just 2-3 working days and you won’t even need to recode the rebuilt unit back to your vehicle.

Not entirely sure if your Ford BCM is defective, but suspect it might be? That’s okay, send it to us and make use of our industry-leading testing facilities. We’ll tell you conclusively whether your Focus/Ranger’s body control module is defective or not, so you can avoid uncertainty and any unnecessary repair costs. 

Solve your Ford BCM woes the smarter way, have your module rebuilt by the experts. Fill out our short test form to get started.

Common failure symptoms:

• Engine no start
• No dipped headlights
• No communication with BCM
• U1000 stored in other modules
• Electric window failure
• Engine light on
• Wiper failure
• No power to heater/AC
• Central locking fault
• Battery drain
• Erratic indicators

Common fault codes: 

• U1000-00 – Solid State Driver Protection Activated
• U3000-49 – Control Module Internal Electronic Failure
• B1D01-11 – Right Low Beam - BCM
• B1D01-15 – Left Low Beam - BCM

Location on the vehicle:
Always refer to manufacturer documentation to locate the defective BCM in your vehicle. However, you will find this module in the passenger side footwell for the Focus Mk3. 

Test and rebuild:
We analyse all control modules on our state-of-the-art testing rigs, which are able to test under realistic driving conditions to uncover hard-to-find faults. We always rebuild with higher-than-standard-quality components to ensure functionality is restored for good. 
 
Programming:
Don’t worry about having to recode your rebuilt BCM back to your vehicle, as this information is preserved throughout our process. Remember, replacement BCMs will need to be recoded to your vehicle at further effort and expense.
 
Quality:
We take quality seriously, this is exemplified by our proud defect rate of just 0.49%. 

Warranty:

Lifetime unlimited mileage*

How do I get my unit rebuilt?

To pay for the rebuild click the Shop Now link above, select your part number and click: Get yours rebuilt.

Print the payment/booking confirmation email.

Package the Ford BCM inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received we will test, rebuild and return your body control module with an unlimited mileage lifetime warranty. (if your unit turns out not to be faulty then we will refund your payment less a small testing fee and return shipping)

What if I don’t want to pay up front?

This is not a problem, if you prefer this option then follow the following steps:

Fill in and submit this test form.

Print the booking confirmation email.

Package the Focus/Ranger BCM inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received, we will test your unit and call you to advise on the outcome of testing, if your control module is faulty and you choose to go ahead with the rebuild then we will take payment over the phone using a debit/credit card.

We will then rebuild your unit and return it to you with an unlimited mileage warranty.

If you require further information regarding this Ford Focus/Ranger BCM then please contact us.