Ford Explorer ABS light - C1095 Pump Motor Circuit Failure
When the Ford Explorer ABS unit fails it can cause constant illumination of the ABS light, on occasion it will also trigger the traction control warning light, these symptoms are caused by internal failures and breakdowns of integral components within the ABS module. These are responsible for the safety of the emergency braking system, but due to these failures, you can expect the system to become non-functional, although, standard braking will still be in effect.
If diagnostic scans are ran on the vehicle, the following fault codes may be shown: C1095 – Pump motor circuit failure, and 01276 – ABS Hydraulic Pump. However, if no communications can be received between diagnostics and the ABS, you will find a stored fault code relating to 01130 – ABS Operation Implausible Signal. Being met with any of these faults indicates that there is an ABS problem and should be checked as soon as possible.
Purchasing a full replacement ABS unit as the resolution to this issue is overly costly, particularly when the original design flaw which led to the malfunction could still be active in the new unit, meaning there is a large risk of the same failure happening again.
We provide a full test and rebuild of your Ford Explorer ABS unit, which will be rebuilt within 2-3 working days, at no extra cost, while eliminating the original fault.
Affected Vehicles:
- Ford Explorer 2002-2005
Common Failure symptoms:
- ABS light on constantly
- Traction control light illuminated
- No communication to the ABS
Common fault codes:
- C1095 – Pump Motor Circuit Failure
- 01276 – ABS Hydraulic Pump
- 01130 – ABS Operation Implausible Signal
Test and rebuild:
Once your unit is delivered to us it is tested extensively on our bespoke testing rigs, where the ABS will go through a strict process of tests in a variety of conditions, if found to be faulty the failing components are then replaced with new higher quality parts.
Programming:
No programming is required, just plug and play once you receive the unit back.
Quality:
Due to our high standard of quality, and rigorous quality assurance checks, our defect rate is 0.49% across all rebuilds. Many major dealerships and specialists use us as their trusted provider for rebuilds and remanufacturing needs, all rebuilds are also covered by our unlimited lifetime mileage warranty.
Warranty:
Lifetime unlimited mileage*
How do I get my unit rebuilt?
To pay for the rebuild click the Shop Now link above, select your part number and click: Get yours rebuilt.
Print the payment/booking confirmation email.
Package the Ford Explorer ABS pump and module inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).
Send us your package by tracked courier (the shipping instructions are on the confirmation email).
Once received we will test, rebuild and return your Ford ABS unit with an unlimited mileage lifetime warranty. (if your unit turns out not to be faulty then we will refund your payment less a small testing fee and return shipping)
What if I don’t want to pay up front?
This is not a problem, if you prefer this option then follow the following steps:
Fill in and submit this test form.
Print the booking confirmation email.
Package the Ford Explorer ABS pump and module inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).
Send us your package by tracked courier (the shipping instructions are on the confirmation email).
Once received, we will test your unit and call you to advise on the outcome of testing, if your ABS unit is faulty and you choose to go ahead with the rebuild then we will take payment over the phone using a debit/credit card.
We will then rebuild your Ford ABS unit and return it to you with an unlimited mileage warranty.
If you require further information regarding this Ford Explorer ABS pump and module then please contact us.