Audi Q7 Not Starting – Caused by Faulty EDC17CP44 Engine ECU

Lifetime warranty*, 2–3 days turnaround Get Yours Rebuilt
Audi Q7 engine ECU EDC17CP44

The most common reason that your Q7 won’t start, and something that you may not have considered yet, is usually down to the malfunction of the Audi Q7 ECU. This ECU, known as a Bosch EDC17CP44, is a problematic module that, when it becomes faulty, will also illuminate the engine light and store multiple fault codes for injector circuits, most prominently P2146 - Fuel Injector Group A Supply Voltage Open Circuit.

 

These fault symptoms usually happen randomly, without warning, and often even begin as intermittent issues, but what is certain is that these faults will become permanent if not rectified early. Often you may be able to read fault codes via diagnostic equipment including, but not limited to, P2149 – Fuel Injector Group B Supply Voltage, P2146 – Fuel Injector Group A Supply Voltage Open Circuit, P0203 – Injector Circuit Open Cylinder 3 and P0202 – Injector Circuit Open Cylinder 2. However, eventually, you will likely find that communications to the engine ECU will no longer be possible, and the vehicle will fail to start.

Shop Now - AUDI Q7 ECU REPAIR

 

Faulty Audi Q7 ECU storing fault P2146 amongst others? What’s next?

Typically, when you are confronted with an illuminated Audi Q7 engine light and the above issues, manufacturers will suggest that you purchase a brand-new engine ECU to resolve these problems.

However, new replacement ECU’s will require coding to the vehicle, costing extra time and money, and are often on back order. What’s more is that once you do get your hands on a replacement, you’ll find that it will fail later down the line. This is because the original manufacturer defects have not been engineered out at factory level and are still present in the ECU internal components and design. Top all that off with a short 1-year warranty and you’re asking for future trouble.

But we can offer you a significantly better option, a full test and rebuild service designed to tackle the issue of your faulty ECU head on, backed by our unlimited mile Lifetime Warranty. Our service is not simply an Audi Q7 ECU repair, it’s a full rebuild using higher rated than standard components, so that it will never fail again, and it only takes 2-3 working days, click Shop Now to get started.

ECU testing ECU Repair

 

 

Common failure symptoms:

  • EML (engine light) on
  • Misfire
  • Cutting out
  • No start
  • Limp mode
  • Flashing glow plug light

 

Common fault codes:

  • P2149 – Fuel Injector Group B Supply Voltage
  • P2146 – Fuel Injector Group A Supply Voltage Open Circuit
  • P0201 – Cylinder 1 Injector Circuit
  • P0202 – Cylinder 2 Injector Circuit
  • P0203 – Cylinder 3 Injector Circuit
  • P0204 – Cylinder 4 Injector Circuit
  • P0205 – Cylinder 5 Injector Circuit
  • P0206 – Cylinder 6 Injector Circuit

 

ECU Location on the vehicle:

In the plenum chamber

 

Test and rebuild:

Each engine management ECU is extensively tested on our state-of-the-art custom-built rigs. Once the unit is identified as faulty, we then move onto the rebuild stage. Each unit is fully stripped, all common failing components are then replaced with versions that are higher rated than standard.

 

Programming:

All original coding is retained during the test and rebuild meaning that you can simply plug and play your Audi Q7’s ECU unit once it’s back with you.

 

Quality:

Due to our extremely high standards and a work defect rate lower than 0.49% on all our rebuilds, we can confidently offer an unlimited mile Lifetime Warranty. Our strict quality control incorporates testing, ESD safety, components, workmanship, even down to securely packaging your unit for delivery back to you: all areas must meet our extremely high warranty standards. What does this mean? It means that after your Audi Q7 ECU repair, the problem will be gone for good.

 

Warranty:

Lifetime unlimited mileage*

 

How do I get my unit rebuilt?

To pay for the rebuild click the Shop Now link above, select your part number and click: Get yours rebuilt.

Print the payment/booking confirmation email.

Package the ECU inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received we will test, rebuild and return your engine ECU with an unlimited mileage lifetime warranty. (if your unit turns out not to be faulty then we will refund your payment less a small testing fee and return shipping)

 

What if I don’t want to pay up front?

This is not a problem, if you prefer this option then follow the following steps:

Fill in and submit this test form.

Print the booking confirmation email.

Package the EDC17CP44 ECU inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received, we will test your ECU and call you to advise on the outcome of testing, if your ECU is faulty and you choose to go ahead with the rebuild then we will take payment over the phone using a debit/credit card.

We will then rebuild your Audi A7 ECU and return it to you with an unlimited mileage warranty.

If you require further information regarding this Audi Q7 not starting issue, then please contact us.

Audi Products/Services

A1

A2

A3

A4

A5

A6

A6 ALLROAD

A6 quattro

A7

A8

Q2

Q3

Q5

Q7

Q8

QUATTRO

R8

RS Q8

RS3

RS4

RS5

RS6

RS7

RSQ3

S1

S3

S4

S5

S6

S7

S8

SQ5

SQ7

TT

Comments on "Audi Q7 Not Starting – Caused by Faulty EDC17CP44 Engine ECU"
Steven says: 08/02/2026 00:38:51
Hi there my friend has been dealing with this issue for over two months now and the garages have not been able to fix this problem for him and keep telling him different things are wrong with the car.I have already told him that the most common problem is with the ecu and has been replaced with a second hand and programmed in but starts now but still has all the problems with it is this something that you would be able to help with and is it possible to program a second hand ecu andseesame fauit
ECU Admin says: 09/02/2026 08:55:57
Hi Steven, you are welcome to send the original, replacement or both units to us for testing if you wish. Please give us a call on 01773535638 with the part number from the ECUs or complete our test form if you would like to send them in, this is the green button at the top of the page. Thank you!
Oozeear Kaleem says: 08/01/2026 07:48:51
My Porsche Cayenne 3.0 tdi CRCa. Fault code : P160300 DME Faulty. Car starts and shutdown after 2-3seconds. Clear Fault. It starts and run well
ECU Admin says: 08/01/2026 09:05:44
Hi there, we would be happy to look into this for you. If you can give us a call with your vehicle details, the symptoms and fault codes, our technical support team will be able to advise further on this for you. You can find all our contact details here contact us Thank you!
BRIAN says: 27/04/2025 01:26:21
Hi, Our 2014 Porsche Cayenne diesel, 3.0L has the P2146 and P0202 codes like I have seen mentioned on other vehicles. The glow plug indicator was flashing and engine light on. the engine ran very rough at idle and would stall. Looks like the same two codes have been repeated 3 times when I used a basic scan tool. Do you believe it is most likely the ECU like other VW and Audis with similar diesel engines? I live in California, USA. not sure about customs fees? thanks
ECU Admin says: 28/04/2025 08:05:42
Hi Brian, these are not common fault codes we see for the Porsche ECU's, however you are still welcome to send the part to us for testing. We would require the part number from the ECU first to ensure we can test your particular one as there are different types, with this we can advise further on costs too. We do receive parts from the USA, I would advise to speak to the courier you plan to use to ship the unit to discuss any customs fees. Thank you!
Ravi says: 19/04/2025 15:38:31
My car lost paper while driving and the coil light came on replaced all glow plugs no luck. Try to read a code with a code reader but does not connect to the car and dont start up
ECU Admin says: 22/04/2025 08:48:49
Hi Ravi, you are more than welcome to send the ECU into us. We would need the part number from the ECU to check the details and advise on the repair cost. Once you have this information, please email this to contact us, or give us a call on 01773535638. Thank you!
Leave a Comment All fields are required*