Peugeot Common ECU Faults
This Peugeot ECU is very common for failing due to water contamination, this causes the pins to corrode inside the multi-plug and can cause a multitude of running problems from complete non starting to misfires and cutting out.
Very common failing ECU fitted to the Peugeot 207 with the 1.4 & 1.6 litre engines built between 2007 and 2015, common symptoms include; anti pollution fault message displayed, overheat warning light on, temperature guage not working, engine running faults, cutting out at idle speed or misfire faults with stored fault codes for the thermostat control, lambda sensors or camshaft sensor faults...
Peugeot 107 built between 2005 - 2013 has a very common problem that causes the electric power steering to fail intermittently, usually restarting the car can correct the problem temproarily...
Common failure symptoms:
Poor Idle speed
Revving up and down
Part No.0 261 206 246 / 96 378 387 80
This is a very common problem with Peugeot 106 1.1 & 1.4, this remanufactured ECU is programmed to work as soon as it is pluged in to the vehicle.
Peugeot 106, 206, 306, 406 1.4 / 1.8(16V) and 406 1.8(16V) models from 1996 to 2002 fitted with Sagem SL96 engine management ECU
A common problem with the Peugeot system Sagem SL96-9 this ECU blows due to the ignition coils breaking down. This manifests it self as a misfire and the engine will be erratic at idle or may not start.
Peugeot Products / Services