Honda CRV ESP/ABS Pump module fault
This ABS Pump Module is a very common failure for the Honda CRV built between 2004 - 2008. The fault causes the ESP/ABS light to illuminate permanently on the instrument cluster.
If you have been for a diagnostic check on your Honda CRV then your mechanic will probably have told you that your have a fault with your “Brake Pressure sensor” or given you the full fault code of: “66-1 BRAKE PRESSURE SENSOR FAILURE” and will probably have told you that you must change your ABS Pump Module for a small fortune
We can rebuild your own ABS pump module to a new specification and provide an unlimited milage Lifetime Warranty*.
When we rebuild your ABS pump we not only correct the problem but the materials and processes we use will reinforce your ABS pump module to prevent the fault from ever reoccurring.
Common Failing Part Numbers:
00009077D0
57110SKNG011M1
57110-SKN-G011-M1
SKNG0
57110-S9A-G012-M1
57110S9AG012M1
S9AG0
S9AGO
(This is just a small list of common part numbers, we cover the entire range of ATE MK60 ABS ASC Pump modules).
We will need your ABS Pump for approximately 2 - 3 working days to complete the full rebuild (times may vary depending on current workload & demand). If you would like to arrange for your ABS Pump to be tested and rebuilt then please fill in this test form.
For further advice please contact us.